IKEA Samla Filament Spool Roller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Higher version of the IKEA Samla Spool Roller, fits perfectly 3 times in a 22L IKEA Samla box
- Rating
- 4.625 / 5
- Likes
- 662
- Downloads
- 4,980
- Makes
- 24
- Views
- 27,663
- Reviews
- 24
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Remixed version of the original, 2 cm higher to accommodate more space for silica gel pearls at the bottom of the box.
Watch my video about the new version here:
As a cheap dry storage box for filament, IKEA Samla boxes (57x39x28 cm) are used by many.
Sadly, when using a short piece of pipe to hold filaments, changing just one without disturbing the other three is very hard.
Each Samla box can hold up to 4 spools with 70mm width.
While the included filament spools from the MMU2S fit into the samla box, they are too wide so only 2 filaments fit in there.
This would mean a lot of wasted space since you now need 3x IKEA samla boxes or one huge one.
This print is the solution:
2 Filament Spools on Prusa MMU2S spools in the first Samla Box, and 3 in the 2nd one.
Print instructions
- Print 3x "spool roll bottom" and 6x "spool roll insert"
- Fit the ends of the rollers into skate bearing
- Push skate bearing assembly into place (will click into place)
- Insert M3 brass insert with soldering iron
- Connect three spool rolls into a big assembly