1 / 3
Snapline (Hobbycreek) replacement element
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement element for Snapline (Hobbycreek) modular hoses used on the arms of their helping hands.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 95
- Makes
- 2
- Views
- 668
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement element for Snapline (Hobbycreek) modular hoses used on the arms of their helping hands.
Once, I broke one element by twisting the arm too much so maybe you did it too or will ;p
| Version | Description | Date |
|---|---|---|
| A.1 | Initial Release | 02/08/2021 |
| A.2 | Remove the waiting of 1200 seconds at the end of the print work in the gcode. | 03/08/2021 |
Printing Instructions
- Element
- PETG for stiffness.
- Layer Height: 0,2 mm
- 2 Perimeters
- No supports
- 100% infill
Notes
- Only tested with Snapline (Hobbycreek) modular hose.
- If you print 2 parts to combine them, they won't work as smooth as with snapline due to the roughness. Just sand it and/or apply lubricant. Try also this one: Modular Hoses (Loc-line like) by Daniel Vitanza | Download free STL model | PrusaPrinters
Have a nice print !
Last note! I've spent quite a lot of time designing, iterating and prototyping on all my models. Therefore, if you enjoy them, please don't forget to like+download and then rate them, so that I can earn so prusaments to continue ;)