Rolli the ghost indicator
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.21 – €0.26 net (excluding VAT)
For file: white_parts_face_iris_teeth_02mm_pla_mk3s_17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.24 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 16.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is Rolli the Hausgeist or enclosure ghost actually.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 67
- Makes
- 0
- Views
- 801
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This is Rolli the Hausgeist or enclosure ghost actually.
Print instructions
Rolli the ghost rolling its eyes over extruder loading actions:
There are two files:
One for the white parts including the face, teeth and irises for Rolli.
One for the black parts including the back cover and the eye balls.
You need an 8x5mm magnet to connect Rolli to your extruder Motors rotator.
- Glue the magnet into the white gear. Superglue works best for me.
- Put it through the black backplate and try if it moves freely when put onto the Extruder Motor.
- Glue the irises into the eyeballs
- Put the eyeballs onto the backplate and snap the face onto the backplate
- Again, make sure everything moves nicely.
- Snap Rolli onto the extruder motor
- Let Rolli do it's spooky magic
I hope you enjoy it :)