1 / 9
Raspberry Pi4 Case for Prusa MK3/S/+
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi4 Case for Prusa Mk3/S/+ using M2.5 so you don't have to enlarge the holes in the Pi.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 203
- Makes
- 2
- Views
- 1,575
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Remixed from WDR's model with the following changes:
- M2.5 screws to mount the Pi in the case so as to not have to enlarge the holes in the Pi.
- Removed extra space for the Pimoroni Fam Shim
- Made a version with the Pi-cam breakaway already removed so I didn't have to cut it out
Put a Raspberry Pi4 on your Prusa MK3/S/+ and have it align perfectly with the frame.
- Smallest form factor possible for a Pi4.
- All peripheral ports accessible (not the Pi headers).
- Break away window for Pi-cam - version with breakaway removed.
- Windows for status lights.
- Slim attachment block to frame.
- Uses styling cues from the Einsy Case with chamfered corners and textured sides
- Easy to print: no supports needed.
Uses:
- 4 - M2.5x16 for the case
- 2 - M3x10 for attaching to printer
Print Instructions
I printed with the following:
- .3mm layer height
- 15% Infill
- PETG
- Support on build plate only (although supports aren't needed, but it's easier/faster to poke out the supports in the screw hole than cleaning it up)
- Complete individual objects
Other settings like .2mm layer height and no supports should work just fine as well.