DS18B20 (Waterproof) Temperature Sensor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.39 – €0.47 net (excluding VAT)
For file: PETG on Prusa Mini / ds18b20-waterproof-mount-v2_04n_02mm_petg_mini_31m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.43 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 30.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Just a simple mount for your DS18B20 waterproof sensor. The version 2 does print a little cleaner on the overhangs.
- Rating
- 4.833 / 5
- Likes
- 25
- Downloads
- 304
- Makes
- 7
- Views
- 1,092
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Just a simple DS18B20 Temperature Sensor mount. I printed it with PLA but if you need it in a place that gets hot you better use something that can withstand the temperature. Slide the sensor in from the top or the bottom. It has a tight fit.
Version 2 prints a little cleaner on the overhangs (rounded them out a little)