PrintABlok to kbricks peg-beam
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows the connection of kbricks rotating parts to the PrintABlok.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You can now use some parts from the kbricks system on PrintABlok cubes (wheels, axles, gears, ...).
PrintABlok has a cube size of 16mm. The cube size of kbricks is 24mm. You need 3 modules of PrintABlok for 2 modules of kbricks.
You can also use these 2 parts to make a rotating connected two PrintABlock cubes.
Printed 0.15mm layer heigth, 2 wall loop, 20% infill. If You have connected upper part, check in slicer “Retraction - Travel distance treshold”, must be belov 1.2mm. The model includes a gap around the peg to allow the slicer to make a firmer connection to the depth of the model.
To connect the base parts of the kbricks system to the PrintABlok, use this model.