Voronoi Table Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€26.68 – €32.61 net (excluding VAT)
For file: Voronoi_Lamp_0.2mm_PETG_MK3S_1d10h38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €29.64 excluding VAT (range midpoint).
- Weight reported by the author
- 286 g
- Print time reported by the author
- 34.63 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
lampshade for table lamp with Voronoi pattern.
- Rating
- 0 / 5
- Likes
- 440
- Downloads
- 529
- Makes
- 0
- Views
- 5,864
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Model
A lampshade with Voronoi pattern for table lamps with E27 or E14 socket.
Dimensions
The lampshade has a diameter of 160 mm and a height of 150 mm.
Printing
Pay attention to the mounting diamenter, when selecting the model. The hole diameter of the lampshade of the E27 base is 41 mm and 24 mm of the E14 base.
When printing this model, I recommend support structures, as the Voronoi pattern creates overhangs that cannot necessarily be printed by every printer without problems. You can find a preset Prusa-Slicer project for the E27 base in the files.
A 0.4 mm nozzle and a layer height of 0.20 mm with printer default settings for infill, etc. are sufficient for printing.
Remix
To remix the model or make your own changes, you will find the FreeCad project in the files as always.
Additional required components
The lampshade does not include the lamp post … and just in case, of course no light bulb. But the components are easy to buy on the Internet or in DIY stores or furniture stores.
Lamp Post
When selecting the table lamp, make sure that it has a lampshade screw connection on the lamp base. The shade usually fits an E27 or E14 lamp base. But pay attention to the dimensions of the base. The hole diameter of the lampshade of the E27 base is 41 mm and 24 mm of the E14 base.
For example you can use this Table Lamp on Amazon or STRÅLA (303.325.26) or SKAFTET (504.054.18) from IKEA.
Light Bulb
For my project I used the Philips Hue White E27 Filament A60 550lm light bulb.
However, you can use any E14 or E27 light bulb for the project (depending on your lamp base, of course) up to a diameter of 80mm.
Assembly
Assembly is simple, but please pay attention to the safety instructions when assembling.
Safety instructions
This model is an accessory for an electrical equipment that is operated above the safe extra-low voltage (50V AC / 120V DC) in accordance with IEC 61140. Therefore, please note the following safety instructions.
| CAUTION! - ELECTRICAL HAZARD |
Only mount the lampshade and light bulb to the lamp when it is switched off and disconnected from the power supply! Improper work on electrical systems can lead to electric shock. Work on electrical systems (e.g. lamp socket or power supply cable) may only be done by qualified personnel in accordance with the local and national electrical regulations and provisions. and regulations. |
| CAUTION - RISK OF FIRE |
 When selecting the light bulb, pay attention to the maximum wattage specifications of the table lamp you are using. If the maximum wattage of the lamp is exceeded, smouldering fires may occur in the lamp holder and/or the electrical cable of the lamp. The distance between surface of bulb and shade must be at least 30 mm. So make sure that the light bulb does not exceed a diameter of 80 mm. |