BIGTREETECH PITFT50 V1.0 + Raspberry PI 4 + low feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa I3 MK3S+ with BIGTREETECH PITFT50 V1.0 (it works very well with Repetier or Octodash installed)
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 90
- Makes
- 1
- Views
- 1,580
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I redesigned the LCD & Touchscreen front panels for my printer made at home and I modified them to be fitted on my Prusa MK3S also.
The LCD & Touchscreen support will mount using the same screws of the original, but be aware that you need to immers the nuts (M3) during the printing.
I fixed both covers (LCD & Touch) on the support using the bolts (M4) 10mm & M4 nuts.
I fixed the BIGTREETECH touch in the cover using the 4 clips (look STL file) and the bolts (M3) 8mm.
To power the Raspberry PI 4B I used the Down Control Module LM2596 connected directly to the 24V of the Prusa PSU.