Flip Text Generator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flip Text Generator in OpenScad
- Rating
- 4.667 / 5
- Likes
- 228
- Downloads
- 2,989
- Makes
- 3
- Views
- 12,217
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Update to V3.1
I included the special characters from thingiverse user phildc and also the idea for the automic insertion of special chars in front of the Name, if one name is much longer than the other name.
With the new option Filler you can choose between 4 different Fillers, if the names differs in there length:
heart: full heart (same as V2.1), this could be fragile, if you reduce the object size at slicing
heart1: (another) full heart
heart2: hollow heart
diamond: a hollow square on its tip
frame: a hollow square
from here it belongs to the origial one (V2.1) and V3
I have seen an advertisement for such 3D printed Flip Texts and decided to write an OpenScad Sketch for that.
Download the Sketch, Open it in OpenScad, replace the two names and generate the stl.
If the names have different length, the shorter name will filled up with a special char, If you want a special char inside the Names, write a blank on that position, it will be replaced with the special char.
To change the size, load it to the slicer and change it there.
Prints best with organic support.