DIN-rail socket for 200A automotive relay - Hutschienenhalter für 200A Kfz-Relais
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIN rail bracket for an automotive 200A relay
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 585
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
For my solar system I needed a way to mount a 200A automotive relay on a DIN-rail. The clamp isn't spring mounted but held in place by two M4x12 screws and nuts. A bit less convenient to install but it is hopefully a one time operation only. The relay is mounted with an M6x10 screw and nut. The nuts are held in place with a drop of superglue.
As I don't trust Chinese specifications I used a 200A relay despite the fact that it has to handle 40A max. May prevent that I have to change it to often.…
Printed in PLA with a 0.4mm nozzle, line width 0.5mm and height of 0.3mm. The base is printed with support. Infill is 15% cubic.
As many of the breakers aren't tight on the rails I added a small one width unit part which allows to lock them in place (1TE-.......stl)
2024.01.22 added blank unit for two width units (36mm)