1 / 1
Fysetc ERB Sturdy Bunny / ERCFv2 2020 Electronics Enclosure — image 1

Fysetc ERB Sturdy Bunny / ERCFv2 2020 Electronics Enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Small discreet enclosure.

Rating
0 / 5
Likes
15
Downloads
93
Makes
1
Views
659
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is a small slightly oversized case that mounts on the bottom of the 2020 profile of the Sturdybunny / ERCF v2 below the filament blocks at the back.

Features

  • Accurate USB-C & Power Pass through holes.
  • Left and Right passthroughs at the top for feeding in wiring.
  • Plenty of ventilation in the lid for air flow.
  • Plenty of height to accomodate the ERB, possibly the Easy BRD too (Heatsinks dependant).
  • Countersunk screw heads in the lid to allow flush fitting.
  • 2x Additional corner supports to prevent the board bending.
  • Additional space within the enclosure for wiring bundles.
  • Height sits perfectly to act as a foot for the ERCF v2 and make it sit stable against the surface (if mounted flat).

BOM
7x M3 Brass inserts
7x M3x6mm Screws
3x M3x16mm Screws + M3 T-Nuts

Printing
Main enclosure will need a small bit of support on the mounting tab.
Lid will need to be printed upside down.

Tags