PEF Business card embosser roller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Emboss your business cards with a couple of turns. Guides keep the card lined up correctly. interchageable rollers.
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 154
- Makes
- 0
- Views
- 2,790
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Print (1) of all STL files except handle (pick which handle you want.)
Print choice of handle (one handle has its own plastic drive, the other has a hole for a .25 x .25 shaft. The one in image has a wood shaft made from black locus wood) I recommend the one with shaft unless you are using a really strong plastic (If making this with PLA, use the handle that requires a wood or metal shaft)
Print a 2nd STL file of gear 1, gear 2, and side
Assembly:
-Put one roller on each shaft.
-Put both matching gears on a shaft (ie: both gear 1 on same shaft, both gear 2 on other shaft)
-align roller images and put shaft ends through sides
- Identify roller shaft without hole. Put that end into the base (see photo)
-put on handle with drive shaft (no stl file for shaft) or without drive shaft. Image has handle with drive shaft.
If you want to make your own custom rollers, Here are the important dimensions of the rollers
Roller
Diameter - 1.1
length round diameter 3.456
Height - 2"
inside square .5 x .5
Emboss out .03 to .04
Emboss in .02