1 / 4
Easy Print Rack
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed an easy to print hatrack system, so I made one. You can also use it to hang bags, etc.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed an easy to print hatrack system, so I made one. Nothing fancy, you only need supports on the bed.
Layer Height: .2 mm
Nozzle: 0.4 or whatever will get you around .2 mm height
Material: I've used PETG and PLA, but you can use what you prefer.