1 / 1
Rancilio Silvia LoadCell Mount (slide-on version)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple mount for loadcells to build a scale in your Rancilio Silvia (update: slide-on and for countersunk screws)
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 275
- Makes
- 1
- Views
- 1,952
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update of memyselfs nice rancilio-silvia-loadcell-mount model:
- The mount
- is slide-on so it doesnt move on the machine (no glue needed)
- I modified the holes for flat/countersunk screws
- The tray holders are slightly thicker and can now be used with slightly thicker pan screw heads (so the heads dont stick out). The original version for countersunk screws is also attached.
Its working well for Rancilio V3 and later (the one where the steam valve was chrome&black plastic). Other versions are to be tested.
Original text:
Since the height under the brew group is limited, I designed a space-saving adapter to hold the loadcell.
It is easily printable without support, ideally made of some temperature resistant material.
The spacing of the holes for mounting a load cell are 15mm.