Gun4IR GunCon 2/G-Con 2 Solenoid model 0530 Support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a no cut mod support for a 0530 solenoid model to fit in a Namco GunCon 2 made to be compatible with Gun4IR PCBs
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 109
- Makes
- 0
- Views
- 1,698
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
This is a no cut mod support for a 0530 solenoid (without the rod) model to fit in a Namco GunCon 2 made to be compatible with Gun4IR official PCBs.
Solenoid model 0530 comes in different varieties 0530, 0530B, 0530T. The two with the B and T letters comes with a shaft that needs to be unscrewed in order to fit in the GunCon 2.
This model also include a recess for the TMP36 temperature sensor where you can insert it and put a little bit of glue to secure it.
The model is made to be printed with support.
Assembly of the solenoid requires 2 M3x4mm screws to secure it (the head of the screw must not be taller than 2.3mm).
Important: I added a small piece of adhesive foam (approx. 5mm thick) to damper the Solenoid kickback and more importantly protect the GunCon 2 case from rubbing slightly with the shaft.
This printed fine on my PRUSA Mini with PLA on 0.20 Quality preset at 15% infill. But to be honest, I haven't tried many settings. ;)
Small disclaimer: I am not a 3D modeler, the model was made with my own measurement of my Namco GunCon 2. It may not be perfect or be the smartest design and please be aware that it may require small adjustments.
If you wan’t to know more about the Gun4IR project: https://www.gun4ir.com