1 / 8
Parkside battery to Yamato tool adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery adapter from parkside battery to a yamato tool
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 91
- Makes
- 0
- Views
- 680
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
For this adapter you need:
- 3 screws (self tapping, do not use too large screws othewise you will split the layers )or you can use threaded inserts for M3 screws.
- 2 female connectors
- 2 male flat long connectors
- soldering iron
- maybe heat shrink cover and hot glue to fix the connectors in place
- (may require a bit of sanding)
The latch mechanism works with 2 small springs and the cover fits in the front with pressure
and it is meant to stay semi perminently on the tool and you can remove it with a small flat screwdriver by pressing the internal piece and lowering the latch.