1 / 3
PiCamera Module Mount for Voron Trident
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PiCamera mount to be placed on the rear gantry extrusion.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 90
- Makes
- 0
- Views
- 874
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Mounts a Pi-Camera Module to the rear gantry extrusion. When used with a camera module 3 - wide this gives you a complete view of the print bed on a 300mm Trident.
Install
- Mounts using hammerhead or roll-in t-nuts and M3x8.
- Uses M2x10 self-tapping screws to mount module.
- Run the cable through the exhaust and down the back of the printer, use a roughly 1m flex cable and route back in through the skirt on the back to the Pi.
Note
- The front mount has a slight chance of collision with the tool head depending on the depth of your toolhead when making an X move at Y min. I have not had an issue with this, but including a version for the top of the extrusion as well.
- I found Spyglass to be the best way to get a module 3 working with Mainsail… but your mileage may vary.