KLP1 LED light bar housing + diffuser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
LED housing and diffuser for any 8mm LED strip, instead of buying the kit from Kingroon, you could buy a quality
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 88
- Makes
- 0
- Views
- 705
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
KLP1 is a good printer and packed with nice features, Sadly the acrylic panels are tinted which make things hard to see.
I made LED housing and diffuser for any 8mm LED strip, instead of buying the kit from Kingroon, you could buy a quality LED strip and print your own housing.
The housing has 4 holes on each corner to feed the power wires for more convenience.
I recommend COB LED strip for more uniform light.
https://www.aliexpress.com/item/1005006358747304.html
Use quality double-sided tape to fix the housing on the panel under the XY belts like the picture #3
LED specs: must be 24V to connect it directly to the power supply, or use 12V or 5V LED with DC-DC converter
Optional stuff:
24V PWM controller for dimming the LED or button
https://www.aliexpress.com/item/1005006361884484.html
inline fuse (to prevent accidental shorting)
https://www.aliexpress.com/item/1005005471789734.html
or
https://www.aliexpress.com/item/32691175691.html
The provided installation picture is from the Official Kingroon not mine, always check your powersupply, don't attempt if you are a novice.
Print Settings:
LED housing
0.2 resolution
15% infill
supports on
LED diffuser
0.2
10~15% infill
ironing top layer