1 / 2
V0.x Back Panel with 140mm fan cooling
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tinkercad-ed a back panel to fit a 140mm fan to allow for better cooling.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Back panel for v0.x printers to allow for a 140mm fan. I tried a few other methods but didn't like the smaller fans that made a ton of noise at idle.
Can do a layer split at 9 to color change.
Using a be quiet! Pure Wings 3 140mm fan, repinned the cable to a xh2.54 without the tach so it's constantly going if the printer is on (CHANGE YOUR JUMPER TO 12V). I used m3x35 button heads with m3 nuts because it's what I had on hand. Used modded 1515 annex clips to hold it on.