Prusa XL spool holder for IKEA Trotten or 2020 extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
External spool holder that uses the original hardware.
- Rating
- 4 / 5
- Likes
- 6
- Downloads
- 39
- Makes
- 0
- Views
- 1,124
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Trotten is great for the XL, but you cannot load the lower spool holders because the crossbar is in the way. One solution would be to move all spools to one side, but I opted to hang them on the shelf instead. This clears enough space for up to 4 filament dryers on the worktop.
This spool holder uses the original part and M4x12 screw. You'll need an additional M4x30 and two M4 Hex nuts. The parts are tight fit, so definitely print from PETG and carefully pull the hex nuts in with a screw and washer from the opposite side. No supports necessary for the standard orientation print. You need supports if you want to print the face down version, which goes very well with the textured build plate. Can be printed without the colored letters. The lower cover is almost purely cosmetic, except that it prevents overtightening.
The holder can be moved by slightly loosening the M4x30 screw. It also works with 2020 extrusion.
Edit: Works perfectly with the official enclosure, but you have to point the spool holder outwards (otherwise the enclosure blocks loading the spools). You can do this on both sides and keep the printer in the middle, or put the printer all the way to one side and only invert the spool holders on that side. The latter is what I do, because it frees enough tabletop space on the other side to hold several filament dryers. The door won't fully open, but I have a simple fix for that: https://www.printables.com/model/986588-prusa-xl-enclosure-hack-for-ikea-trotten