Ender 3 V3 SE/KE 90 Degree Angle/Stabilizer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angles to drastically reduce the wobble of the gantry.
- Rating
- 5 / 5
- Likes
- 449
- Downloads
- 2,267
- Makes
- 16
- Views
- 17,580
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
!!Important!!
I highly recommend straightening the Z-Axis gantry before doing this mod, as explained here.
The Ender 3 V3 SE/KE faces a significant issue with a wobbling frame, which can result in serious quality problems, especially at higher print speeds.
The optimal solution involves supporting the gantry with rods, as demonstrated here.
However, I aimed for a more compact alternative that doesn't require additional purchases, so I designed these brackets. I secured them in place with hot glue.
Why hot glue? - It can still be removed with some force and heat, yet it provides sufficient strength.
If you never plan on disassembling your printer again, you are free to use even stronger glues.
Make sure to clean all glueing surfaces to ensure it sticks, with 99% alcohol for example.
Print two copies of this bracket and install one on each side.
I suggest using PLA with three walls and a minimum of 60% gyroid infill.
You'll be surprised by the increased rigidity of the gantry afterward.