Pioneer Rhino Rack Anderson Plug Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pioneer Rhino Rack adapter which can securely mount a trailer vision case that holds an Anderson Plug.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 54
- Makes
- 0
- Views
- 704
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
I needed a way to mount an Anderson Plug to my Pioneer Rhino Rack. I used a water proof Anderson Plug case from Trailer Vision and designed an adapter that can attach to the roof rack as well as securely attach the Trailer Vision case.
The four holes are for an M5 bolt (I only had round heads) which then are secured to the adapter with nyloc nuts on the other side.
It would have been easier to use hex heads as you can't get a screwdriver in such a tight space between the case and the roof.
The word LED is an indicator to show which way the block should be facing as the 4 holes aren't exactly identical. (There is an LED light attached to this case, but it's way to bright so I just disconnect it)
During test prints using PLA the plastic would buckle under the pressure of the bolt that is attaching to the rack.
I wasn't too sure how strong to make it in PETG so I just guessed 40% fill with a few extra perimeters.
I didn't trust not doing support from the build plate with the middle hole.