Enclosure for Muldex 3D printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for Muldex 3D printer
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 36
- Makes
- 0
- Views
- 648
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
I designed this enclosure to print higher temperature materials on my Muldex 3D printer.
Details about the printer: https://github.com/3dprintingworld/MULDEX
I printed the parts in PETG.
The original part cooling fan modules will collide with the doors, but we can use these ones instead: https://www.prusaprinters.org/prints/57909-slim-fan-modules-for-muldex-3d-printer
Other Needed material:
- 5mm clear panels ; dimensions in the step files
- 4x M3x40mm screws as hinge pins
- 16x M5x10mm FHC screws (hinge-frame)
- 16x M5x14mm FHC screws (hinge-door)
- 23x M5 T-nuts
- 4x M5x8mm BHC screws (stepper covers)
- 1x M5x10mm CHC screw (stepper cover center)
- 2x M5x10mm CHC screw (bottom panels)
- 16x M5 collar nuts (hinge-door)
- 16x M5x12mm BHC screws (panels-corners)
- 16x M5 hex nuts (panels-corners)
Edit 18/12/2021:
I added thermostatic elements that can lift the top cover of the enclosure whenever it gets too hot inside. The 2 rear corner parts should be replaced by the dedicated ones, and I used these thermostatic elements: https://www.aliexpress.com/item/4000708543393.html
I also updated the other corner parts with different nut pocket orientation for easier assembly.