1 / 5
mijia thermometer support for bambuX1 P1小米米家温湿度计支架 拓竹X1 P1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mijia thermometer support for bambuX1 P1.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mijia thermometer support for bambuX1 P1.
It is require a magnetic steel with a diameter of 20mm and a thickness of 5mm.
For specific operations, please refer to video:
https://www.bilibili.com/video/BV1o5411y7DX/?spm_id_from=333.999.0.0&vd_source=df9bfe16aa566e1af12ac024c9860624
拓竹专用小米温湿度计磁性支架,可以如图所示放置在拓竹3d打印机内部,监控3d打印机的仓温。
由于此支架设置了专门的角度,在使用后既可以在打印机外部清晰看到小米温湿度计上的示数,也可以在拓竹app内清晰读数。
模型的磁钢安装尺寸为直径20,厚度5mm,可使用上述尺寸内的磁钢进行安装。
推荐使用磁钢是直径20,厚度5
推荐的固定磁钢胶水是AB胶。
