1 / 1
GT2 Belt Conversion for Felix 2.0 Printer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the belt tensioner for the Felix 2 printer that is for the GT2 pitch belt conversion.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is the belt tensioner for the Felix 2 printer that is for the GT2 pitch belt conversion.
The Felix 2 comes with 3M timing belt, but I couldn't source locally when I had problems, so converted to a GT2 2mm pitch belt.
You can use the same part for both X and Y Axis
Instructions
Used in conjunction with a 16 tooth drive pulley you need to update the firmware to 100 steps/mm for each axis you convert.
In theory it should now give a resolution 10microns/step
Category: 3D Printer Parts