KUXIU iPad Magnetic Holder Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to mount the holder to a wall instead of a table.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 25
- Makes
- 0
- Views
- 499
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I liked the KUXIU iPad magnetic stand holder (https://kuxiu.co/products/x36-stand) but wanted to mount it on a wall instead of a table. So I designed an adapter piece which is mounted to a wall and takes the screwing mount of the iPad Holder. FYI I designed it for the IPad Pro 12.9-Inch (2018-2022 Model) version, but could not spot a difference to the other versions by means of the screwing surface. I created it for a screw diameter of 39 mm.
I printed it in PETG with a dynamic infill (80% at the wall mount part, 30% at the rest) and probably used more infill than needed, because I was paranoid about the holder breaking and my iPad falling. Anyway, it turned out this thing is rock solid, probably with even less infill. So feel free to experiment yourself.
The wall mount requires two screws of diameter max 5mm and a length according your wall. The screws shouldn't be too short, the resulting moment from the weight of the ipad and the lever should not be underestimated.
The back also takes two washers ID 5mm OD 20mm which are slid in from the front, one for each hole.
If you have any questions, let me know!
Happy printing!