Cat40 tool holder storage sockts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Angled tool holder holders to fit in a filing cabinet
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 108
- Makes
- 0
- Views
- 642
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I started with the design by Backhoebill but wanted to speed printing time. The tool_holder_angled.stp is has the same footprint and tool holder angle as his but prints about 3x faster.
Since I have deeper drawers, I changed the angle to 20deg and this worked quite well for my drawers. The nice thing about the 20deg holders is they are balanced and won't fall over unless you have a really top heavy tool.
I print them 16 at a time with a 0.4mm nozzle but would prefer to use a 0.6 or 0.8 nozzle for increased speed.
PETG should have good resistance to machining coolant but I suspect that PLA would not so beware of that.
Print Settings
Printer:
Vivedino Troodon
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
Neat PETGOrange
Category: Machine Tools