Pond pump adapter fitting (joins 1" NPT to 2" PVC slip fitting)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For all 2 of you out there who might need this exact combo... well, here you are!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A custom coupling for Vivosun (and similar) pond pumps with a 1" (nominal) male NPT threaded outlet, to connect to a 2" (nominal) PVC rubber coupling with a hose clamp.
One side is a 1" FPT, and the other side is a 2" PVC slip fitting. Note that since these are nominal sizes:
- A 1" NPT thread actually tapers from ~1.2" to ~1.25". See https://www.engineersedge.com/hardware/taper-pipe-threads.htm for more details.
- A 2" Schedule 40 PVC pipe actually has an OD of 2.375". See https://www.pvcfittingsonline.com/resource-center/pvc-pipe-dimensions-18-through-24/ for more details.
Print in something tough like PETG, with small layer heights (recommend 0.12mm) and plenty of wall loops (recommend 4) and sufficient infill such that you can tighten the fitting without risk of damage. My adapter fitting screws on with perfect thread engagement.
Finally, if you do make use of this, please do leave a make and let me know! I'd be quite surprised, actually, if anyone else needed exactly this part.