LayersFactory
Report model
1 / 2
TRX4M 18650 battery holder — image 1
1 / 2

TRX4M 18650 battery holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

GaPa

@GaPa

TRX4M upgrade battery to 18650 Li-Ion

Rating
0 / 5
Likes
28
Downloads
102
Makes
1
Views
1,312
Reviews
0

Updated at source:

Model information

Source
Printables
Category
RC & Robotics
License
Creative Commons — Public Domain
DetailsFiles (4)Makes & comments (Makes: 1) (Comments: 2)Remixes (0)Collections (48)Related

Original screws were used to fix the holder.

18650 batteries must have a discharge current higher than 20A!

Sony/Murata 30A VTC6 3000mAh (SONY US18650VTC6  30A !)

A hard pin was used from the 18650 battery holder.


https://www.aliexpress.com/item/1005002481983856.html?spm=a2g0o.productlist.main.5.3ed7jeZLjeZLJg&algo_pvid=4a377337-131a-4247-81f1-72e9bf41c5b8&aem_p4p_detail=202401242339171752845729653440000013046&algo_exp_id=4a377337-131a-4247-81f1-72e9bf41c5b8-2&pdp_npi=4%40dis%21EUR%212.59%212.59%21%21%212.75%212.75%21%40210324c817061683568882069e9024%2112000020810965164%21sea%21SK%21141273635%21&curPageLogUid=9fT1Jwo4cQFw&utparam-url=scene%3Asearch%7Cquery_from%3A&search_p4p_id=202401242339171752845729653440000013046_3

The connection diagram of the connector is on the attached picture.
Attention, if the connector is connected incorrectly, there is a danger of destroying the receiver + ESC!

Printing 0.2mm height , PLA, no support

Tags

upgrade1865018650holdertrx4m