1 / 5
Voronoi Coaster with pillar coaster holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Voronoi coaster with holder
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 132
- Makes
- 0
- Views
- 475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Voronoi pattern coaster 4X:
Print Dimensions: Height = 0.36 cm (0.14 Inches) | Diameter = 9.5 cm (3.74 Inches)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 1 hours and 58 Minutes
Amount of material required: ~ 14.5 m
Column Coaster Holder:
Print Dimensions: Height = 3 cm (1.18 Inches) | Diameter = 11.2 cm (4.41 Inches)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 1 hours and 37 Minutes
Amount of material required: ~ 14.2 m
TOTAL PRINT TIME: 3 Hours and 35 Minutes
TOTAL PRINT MATERIAL: ~ 28.7 m