1 / 4
Philips OneBlade Pro 360 Face & Body Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Should fit all Pro models
- Rating
- 4.667 / 5
- Likes
- 89
- Downloads
- 574
- Makes
- 6
- Views
- 3,108
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For the fixing of the comb and the device itself, we need 5 screws m3x8mm. For attaching the guard holder we need m3x20 or we can use glue.
The current files are slightly different from the ones in the picture, I had to do some optimisation.
Print settings:
- 0.20mm layer
- Gyroid Infill 15%. (For the largest part of the print, I recommend using a different filling for the gyroid, which is a waste of time.)