Suet Fat Ball Feeder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.53 – €5.54 net (excluding VAT)
For file: Fat_Ball_Feeder_0.4n_0.2mm_PLA_MK4IS_3h59m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.03 excluding VAT (range midpoint).
- Weight reported by the author
- 85 g
- Print time reported by the author
- 3.98 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bird save suet fat ball feeder for 3 fat balls.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 123
- Makes
- 1
- Views
- 672
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Fat Ball Feeder
This fat ball holder comes in handy, especially on colder days when birds have more difficulty finding food. The biggest advantage of this product is that it is animal-friendly. In case you didn't know yet, birds can get stuck in the net of the fat ball with serious consequences.
How to use:
Simply place three fat balls in one of the two Voronoi shells and position the other shell on top. Press the two caps onto the bottom and top, requiring a bit of force to secure them in place.
Print instructions:
I added 2 print files one with supports en one without. the top cap has in both files support. The Voronoi shells can be printed without support but you will end up with some filament strings in the inside, as shown in the picture below. The strings can of course be removed afterwards.
