ErgoDonk Zero case
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.24 – €2.74 net (excluding VAT)
For file: RH_THICKPLATE_0.3mm_PLA_MK3S_2h21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.49 excluding VAT (range midpoint).
- Weight reported by the author
- 34 g
- Print time reported by the author
- 2.36 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Case for the ErgoDonk Zero keyboard
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Cases for the ErgoDonk Zero keyboard.
Tested with PCB v0.2.
Should only be used with MX switches.
Right and Left hand cases are unique and not interchangeable.
The keyplate is mirrored for the right and left hand. They are split into separate files with a LH/RH suffix to prevent any confusion. The should be printed with the notches up, and the side that shows through the keys is against the build plate. They are oriented that way in the .stl & gcode files.
You can add print helper objects to keep the edges from curling. There is a ‘sacrificial’ support below the bridge that connects the island in the middle of the thumb cluster. Snap that off by hand. (It's highlighted in the image with the yellow arrow).
Use 8mm screws if the backplate is used. If no back plate is used, go with 4mm screws.
UPDATE: April 2026, fusion 360 source files have been added. The were not initially intended for release, so they are a little rough around the edges. (i.e. no components, only bodies)
The case sketches started out as KiCad PCB exports, so the key profile shapes don't always line up 100%, so there's lots of 'sliver' overlapping shapes. This resulted in tons of manual corrections & shape tweaks both during the sketch and extrusion phases.
I lost the thickaronie keyplate source file, so I've created it as best i can.
You'll find the start of a case for a choc variant in there, but i could never get my hands on a full set of choc keycaps, so i never finished it.