1 / 3
Voronoi Bookend
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A voronoi-patterned bookend
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 72
- Makes
- 0
- Views
- 391
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
This is a simple bookend created running the Voronoi algorithm manually in Solidworks. It is designed for a 0.6mm nozzle. The final product is 143mm (~5 10/16") tall, 78mm wide (~3") wide, and 90mm (~3.5") deep.
For strength, print it on its side with organic supports turned on, as shown. Use the included 3mf, which a pre-configured PrusaSlicer config.
If you want to set the model up in the slicer manually:
- Add the included step or 3mf file to PrusaSlicer
- Orient the model sideways
- Select the model
- Open the paint-on supports tool from the toolbar, then click “automatic painting”.
- Enable support for enforcers
- Set the support type to Organic.