1 / 6
Daylight on a matchstick for K1 Riser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Betweener that can mount a daylight on a matchstick. Fits in the K1 riser designed by @JoeCooper_466417
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 0
- Views
- 460
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Betweener that can mount a daylight on a matchstick. Fits in the K1 riser designed by @JoeCooper_466417
Printed in ABS with no supports, 3 top and bottom layers, 15% Infill.
Each betweener will need 2 m3 heat inserts and 2 m3x6 screws. I used a jst 1.25 2 pin female pigtail to the 2.54 jst male with an added set of wires coming out of the 2.54 connector to daisy chain the front and left side lights. This draws off the stock led pin and is controllable without any config changes.