1 / 9
Can holder 0.33L (sleek cans)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a simple 0.33L can holder for bicycles. 64mm between the M5 mounting bolts
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 60
- Makes
- 0
- Views
- 409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Just a simple holder for 0,33L cans (tall & slim cans).
64mm between the two M5 mounting bolts (standard)
Works fine with PLA and PET/PETG, but PLA might break after 50 cycles or so.
I have added a TPU/FLEX-variant as well, because I have no idea what else to do with my TPU-rolls. It's quite a bit thicker at the bottom and 3mm wider. It feels sturdy enough for road and gravel rides.
Suggested print setting
PETG:
- Print temperature: 235C
- Bed temperature 70C
- Print speed: 80mm/s, wall speed 40mm/s, initial layer 45mm/s
- Infill: 15% Gyroidal
- Acceleration: 2000 mm/s^2
- Cooling: 30%
- Layer height: 0.24mm
PLA:
Whatever - PLA just works.
TPU:
Just go slow, maybe 40mm/s.