Pocket Knuckle Bones Game
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pocket version of the mini game Knuckle Bones from Cult of the Lamb.
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 348
- Makes
- 3
- Views
- 1,712
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
-This is a pocket version of the mini game Knuckle Bones from Cult of the Lamb.
-You will need at least 17 D6 of 12mm max., you can fit a total of 18 dices.
-Print ant 0.2 and whatever infill you want, no supports or anything like that needed.
-I recomend using Ironing for a better finish.
-I've used PLA 850.
-When imported into the slicer, select all the bodies and assemble or group them so its easier to move around and print it all assembled.
-You can eliminate the latches and print the file named “Anclaje Indep.” 4 times so you can print them separately, this is so the model can fit in smaller print beds.
-The gcode I've added is meant for a X1 Carbon with the AMS to print it in two colors, red and black, as in the photos.
Have fun!!!
Edit (13/10/2024): Added the V15, the only difference is that's a tad smaller, around 6mm less in the X and Y axis. Nothing too fancy but I just wanted to make the holes a little smaller, but still fitting the 12mm dice.