Cable Guide for Ratrig Vcore 3
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cable guide for Ratrig Vcore 3 using piano wire and teflon tube. Quick to open with clip.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 64
- Makes
- 0
- Views
- 686
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Cable guide for my Ratrig Vcore 3 300.
There is a a frame anchor and a hotend anchor for the piano wire.
For the Frame anchor use a M3 screw for securing the piano wire and the original screw for mounting it to the printer frame.
For the hotend anchor use original screws from Ratrig (M3x12 I think)
I used 10 pieces of the cable guide for my Vcore 300. The spacing between the guides is filled with teflon tube (same as for filament). Distance between the guides is approximately 6cm.
Print the same amount of clips and cable guide parts.