Mounting Box for FM Transmitter Chip
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.64 – €0.78 net (excluding VAT)
For file: FX-TX.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.71 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 45 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Pressure fit mounting box for FM Transmitter chip: https://www.amazon.com/gp/product/B08PVBZB8F/
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pressure fit mounting box for FM Transmitter chip: https://www.amazon.com/gp/product/B08PVBZB8F/
NOTE: YOU WILL NEED TO REMOVE THE MIC FROM THE BOARD FOR THIS TO FIT
- Resolution: <= .28
- Infill: >=20%
- Filament material: PLA
- Print with brim to keep wings from warping.
OnShape link if you want to edit: https://cad.onshape.com/documents/de05c248a9c4b200dc03bcef/w/c5786c24369901dbe55d89a3/e/a0ac56d3a2f6660b6fd087f0