TheSolderHolder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.12 – €0.14 net (excluding VAT)
For file: TheSolderHolderLid.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.13 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 6.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easy way to store your solder. (up to 3mm diameter)
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 20
- Makes
- 0
- Views
- 116
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is the SolderHolder.
In order to use it, first you have to roll up the solder on the solder spool (as shown in the pictures). Then insert it into the case and pull the spool out (you might have to twist it a little if it is to tight). Finally just pull some solder through the lid and close it up. It's that easy.
I have included a lid with tigther fit, depending on your printer and print setting you might need it. I printed with an Anycubic Vyper, PLA+ and 0,15mm layer height.
Also it should work with all types of solder up to a diameter of 3mm.