Loft / Bunk Bed Tray (Multi-Part)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€9.63 – €11.77 net (excluding VAT)
For file: caddy_v2_tray_0.2mm_PLA_MK3S_9h33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €10.70 excluding VAT (range midpoint).
- Weight reported by the author
- 158 g
- Print time reported by the author
- 9.55 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple organizer designed to slide over a loft or bunk bed safety rail.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 134
- Makes
- 1
- Views
- 1,143
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Designed for a college dorm room lofted bed, this organizer tray is meant to attach to the safety rail. It is provided as multiple components for easy printing (and colour coordinating).
Several different sizes are provided for the attachment arm to most closely match the thickness of the safety rail. Screws are provided for tightening to the rail.
Tips:
- The large, flat tray may be best printed in PLA, 3-4 perimeters, to minimize warping (any warping may affect assembly) – no supports
- The attachment arm is printed well with PETG, on its short side, for maximum strength, 4+ perimeters (PLA may creep over time depending on the screw tension) - no supports
- The screws (2x) can be printed PLA (flat on their heads), with one or two extra perimeters - no supports
- The cups are best printed upside down. They work without supports (MK3s) but will have a rough inner-bottom. Supports will solve that.