Bidet from a PET bottle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can be screwed onto a PET bottle, finds use as a portable bidet for travels or at home.
- Rating
- 5 / 5
- Likes
- 38
- Downloads
- 229
- Makes
- 3
- Views
- 1,468
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
The use of it should be obvious. Just fill the PET bottle with (warm) water and screw the printed part on. It probably will not be watertight, so I printed (with Shore 94A TPU, or softer) and inserted the gasket https://www.thingiverse.com/thing:5542900 that MediaBaron made (black part in the picture). Now the bidet is perfectly watertight (except at the nozzle :-).
I used the jet nozzle model (smaller nozzle) from MelihKa. If you want a larger nozzle, just use a drill bit - max. 5mm.
Printed from PET-G with variable layer height. If you print the thread part with max 0.15 mm LH it should come out well.