Bending Jig
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.87 – €1.07 net (excluding VAT)
For file: BendingJig_0.2mm_PLA_MK3S_1h4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.97 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.07 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bending jig for electronic components in 7.5 - 10.0 - 12.5 - 15.0 and 17.5 mm grid.
- Rating
- 4.917 / 5
- Likes
- 2,351
- Downloads
- 5,378
- Makes
- 137
- Views
- 20,099
- Reviews
- 109
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I found this jig made from wood on my trip to Japan twenty years ago in the alleys of an electronics market in Shibuya, Tokyo. I thought why not share with you the little tool that has served me well for years.
Model
133 x 17.5 mm Bending jig for electronic components
Ideal for bending the connecting wires of resistors, diodes, chokes, capacitors, electrolytic capacitors etc. to prepare the components perfectly for soldering into a PCB.
5 grid sizes suitable:
7.5 mm
10.0 mm
12.5 mm
15.0 mm
17.5 mm
Printing
You can use any non-flexible filament as a printing material, such as PLA, PET-G, ABS, etc. In the print files you will find a Prusa Slicer project and the STL file. The model is aligned so that you can print them directly and you don't need any supports. A 0.4 mm nozzle and a layer height of 0.20 mm with printer default settings with 15% infill, etc. are sufficient for printing.
Assembly
There is nothing to assemble.
Usage
Remix
To remix the model or make your own changes, you will find the FreeCad project in the files as always.