Worm Gear
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.13 – €0.16 net (excluding VAT)
For file: Bolt_0.4n_0.2mm_PLA_MK4_11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.14 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 10.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This model demonstrates the functionality of a worm gear.
- Rating
- 4 / 5
- Likes
- 33
- Downloads
- 368
- Makes
- 1
- Views
- 2,040
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial
This model is easy to print and easy to assemble without any glue or additional parts. The chosen tolerances hold the model in place.
If you are arranging the parts with the slicer software place them in the same orientation as in the second picture.
For most of the parts I used a layer thickness of 0.2mm. For the worm and the worm wheel I used 0.1mm and activated supports (don't forget to remove all of it after printing).
I used PLA filament.