1 / 2
Deeper recess color change DELACK nameplate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nameplate with deeper recess on lettering and webbing on the A.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When I first printed the nameplate with color change, the first layer was not enough to hide the color behind from bleeding through. I deepened the recess of the letters to get at least 4 layers of the first color on before the DELACK starts bridging with a different color. I also had a hell of a time keeping that little bit of the center section of the A on the build plate. So I added in very think webbing on first layer to hold it down better. Then that webbing can be removed with an xacto blade.