1 / 4
Remote Control holder attached to the light switch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remote Control holder attached to the light switch
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 71
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I made this remote control holder attached to the frame of light switch (for the always misplaced blind's remote control) and because I didn't want to drill or glue to the wall with the previous original remote control holder.
It works with all below frames from the series Efapel's LOGUS 90.
ANIMATO | CRYSTAL | METALLO | ARBORE | PETRA
Mine are CRYSTAL
Technical data of LOGUS 90
https://www.efapel.pt/en/products/logus-90
I printed in PETG but it should work with PLA
- Infill: 15%
- Layer Height: 0.2mm
- Supports: Yes, everywhere and organic
If you like my work consider