Rubbermaid Dry Box Raised Floor
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.19 – €1.46 net (excluding VAT)
For file: Rubbermaid_Raised_Floor_0.2mm_PLA_MINI_1h24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.32 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 1.4 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Raised floor for the 5L Rubbermaid Dry Box
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 460
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The raised floor is use to separate the silica gel desiccant from the spool holder.
Note that i splitted the model in half to be able to print it on the MINI and that i added a modifier in Prusaslicer to change the infill pattern and the top and bottom layers parameters to create the honeycomb pattern of the raised floor.