Original Samla Box Clip (Large and Small)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.60 – €0.74 net (excluding VAT)
For file: samla box clip small_0.2mm_PETG_MK3S_53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.67 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 53.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Locking Clips for IKEA Samla Boxes with the original geometry
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 76
- Makes
- 2
- Views
- 325
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
So today I had to find out that my favorite SAMLA boxes are still available, but IKEA didn't have the locking clips anymore.
I found a lot of designs online, but I wanted to replicate the original geometry as well as possible. So I tried to reverse engineer the two clips and I think they are almost identical to originals.
The large on fits the 65l box and the small one works for the 22l and 5l boxes.
I printed them in PETG and it worked fine. I guess other materials will work as well. Just make sure there is sufficient bed adhesion.