Elgato Stream Deck MK.2 Faceplate
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.78 – €0.95 net (excluding VAT)
For file: StreamDeck_Cover_0.3mm_PETG_MINI_51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.87 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 51 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a very simple faceplate / frontplate / cover for the Elgato Stream Deck MK.2
- Rating
- 4.769 / 5
- Likes
- 152
- Downloads
- 1,886
- Makes
- 14
- Views
- 10,305
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was quite surprised that I did not find any frontplate for the Elgato Stream Deck MK.2 so I had to try to make one on my own.
Actually this is the first prototype (printed at 0.30 mm) and so it's far away from being perfect. But it fits much better than expected. So, as it is good enough for me, it might be good enough for you.
I printed it on my Mini+ with Prusament Signal White PETG on the textured plate.