2 color vase+voronoi flower pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vase mode flower pot (inner) in one color and Voronoi outer basket. Combination of 2 colors for trendy design.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 75
- Makes
- 1
- Views
- 539
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Original size has inner top diameter: ~90mm, inner bottom diameter: ~64mm, inner height: ~74 mm
Print inner part in vase mode (you my set extrusion width).
Outer basket (mesh) to be printed in normal mode. Make sure your filament does not string much.
Both part are pretty thin, so be careful.
Inner part shall fit well into the “basket”. If it not fitted well you may do a little sanding of basket inner side (just to eliminate overhangs). Or just lightly blow the basket by a hot-gun while putting together.
If you wanted a model that is easier and faster to print then see this model: https://www.printables.com/model/738153-voronoi-vase-flower-pot